CASE-INTERNATIONAL 585 (DT) vs CASE-INTERNATIONAL 595 (DT)
3 material differences · fewer than 12
Which should you choose?
Read our verdict on the 585 (DT) and the 595 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 12 fields identical or within 5%, which is not counted as material
| Field | 585 (DT) | 595 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 59.1 hp | — |
| Engine declared | IHC D-206 | IHC D-206 | — |
| Displacement declared | 3.38 L | 3.38 L | — |
| Maximum torque declared | 162 lb·ft · 220 N·m | 162 lb·ft · 220 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry Laycock single disc clutch | Pedal-operated dry Laycock single-disc clutch | differs |
| Hydraulics & hitch | |||
| Three-point lift at ends declared | 4,409 lb · 2,000 kg | 4,409 lb · 2,000 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,639 lb · 2,558 kg | 6,440 lb · 2,921 kg | +14% 595 (DT) |
| Wheelbase declared | 78.0 in · 1,981 mm | 84.5 in · 2,146 mm | +8% 595 (DT) |
| Length declared | 141.6 in · 3,597 mm | 142.0 in · 3,607 mm | — |
| Width declared | 73.2 in · 1,859 mm | 75.0 in · 1,905 mm | — |
| Height declared | 96.5 in · 2,451 mm | 96.5 in · 2,451 mm | — |
| Ground clearance declared | — | 22.1 in · 561 mm | — |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 11.7 ft · 3.56 m | — |
| Fuel tank declared | 80.0 qt · 75.7 L | 80.0 qt · 75.7 L | — |
CASE-INTERNATIONAL 585 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 585”
- Source: Traktorenlexikon, “Case-IH 3230”
CASE-INTERNATIONAL 595 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 595”
- Source: Traktorenlexikon, “Case-IH 3230”