CASE-INTERNATIONAL 495 (DT) vs ZETOR 3320/3340

11 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 495 (DT) and the 3320/3340 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 495 (DT) and ZETOR 3320/3340, field by field
Field	495 (DT)	3320/3340	Gap
Engine
Engine power, claimed claimed	51.2 hp	50.3 hp	—
Engine declared	IHC D-179	ZBROJORKA Z-5201	differs
Displacement declared	2.93 L	2.70 L	+9% 495 (DT)
Maximum torque declared	134 lb·ft · 182 N·m	117 lb·ft · 158 N·m	+15% 495 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch	dry Zbrojovka double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	8.5 gpm · 32.0 L/min	—
Pressure declared	—	3,191 psi · 220 bar	—
Three-point lift at ends declared	3,704 lb · 1,680 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	6,382 lb · 2,895 kg	+23% 3320/3340
Wheelbase declared	79.1 in · 2,010 mm	83.2 in · 2,114 mm	—
Length declared	136.0 in · 3,454 mm	143.3 in · 3,640 mm	+5% 3320/3340
Width declared	66.0 in · 1,676 mm	70.9 in · 1,800 mm	+7% 3320/3340
Height declared	93.5 in · 2,375 mm	103.0 in · 2,615 mm	+10% 3320/3340
Ground clearance declared	22.1 in · 561 mm	14.8 in · 375 mm	+50% 495 (DT)
Turning radius, braked declared	11.1 ft · 3.38 m	11.5 ft · 3.51 m	—
Fuel tank declared	80.0 qt · 75.7 L	58.1 qt · 55.0 L	+38% 495 (DT)

Source

Source