CASE-INTERNATIONAL 495 (DT) vs Massey Ferguson MF 4215 (A)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 495 (DT) and the MF 4215 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 495 (DT) and Massey Ferguson MF 4215 (A), field by field
Field	495 (DT)	MF 4215 (A)	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.4 hp	—
Engine declared	IHC D-179	Perkins 903.27	differs
Displacement declared	2.93 L	2.70 L	+9% 495 (DT)
Maximum torque declared	134 lb·ft · 182 N·m	136 lb·ft · 184 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pressure declared	—	2,031 psi · 140 bar	—
Three-point lift at ends declared	3,704 lb · 1,680 kg	4,718 lb · 2,140 kg	+27% MF 4215 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	5,258 lb · 2,385 kg	—
Wheelbase declared	79.1 in · 2,010 mm	83.9 in · 2,130 mm	+6% MF 4215 (A)
Length declared	136.0 in · 3,454 mm	149.0 in · 3,785 mm	+10% MF 4215 (A)
Width declared	66.0 in · 1,676 mm	78.0 in · 1,982 mm	+18% MF 4215 (A)
Height declared	93.5 in · 2,375 mm	99.0 in · 2,515 mm	+6% MF 4215 (A)
Ground clearance declared	22.1 in · 561 mm	8.3 in · 210 mm	+167% 495 (DT)
Turning radius, braked declared	11.1 ft · 3.38 m	—	—
Fuel tank declared	80.0 qt · 75.7 L	90.9 qt · 86.0 L	+14% MF 4215 (A)

Source

Source