CASE-INTERNATIONAL 495 (DT) vs Ford 3610
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 495 (DT) and the 3610 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 495 (DT) | 3610 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 46.4 hp | +10% 495 (DT) |
| Engine declared | IHC D-179 | — | — |
| Displacement declared | 2.93 L | — | — |
| Maximum torque declared | 134 lb·ft · 182 N·m | 132 lb·ft · 179.5 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.2 gpm · 27.4 L/min | — |
| Three-point lift at ends declared | 3,704 lb · 1,680 kg | 3,115 lb · 1,413 kg | +19% 495 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,199 lb · 2,358 kg | 5,335 lb · 2,420 kg | — |
| Wheelbase declared | 79.1 in · 2,010 mm | 75.8 in · 1,925 mm | — |
| Length declared | 136.0 in · 3,454 mm | 128.0 in · 3,250 mm | +6% 495 (DT) |
| Width declared | 66.0 in · 1,676 mm | 64.6 in · 1,640 mm | — |
| Height declared | 93.5 in · 2,375 mm | 84.6 in · 2,150 mm | +10% 495 (DT) |
| Ground clearance declared | 22.1 in · 561 mm | 12.4 in · 315 mm | +78% 495 (DT) |
| Turning radius, braked declared | 11.1 ft · 3.38 m | 10.1 ft · 3.07 m | +10% 495 (DT) |
| Fuel tank declared | 80.0 qt · 75.7 L | 52.0 qt · 49.2 L | +54% 495 (DT) |
CASE-INTERNATIONAL 495 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 495”
- Source: Traktorenlexikon, “IHC 553”
Ford 3610 sources
Source
- Source: Traktorenlexikon, “Ford 3610”