10 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoZETOR 7520/75401995–1999No measured PTO figure

Which should you choose?

Read our verdict on the 4210 (DT) and the 7520/7540 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4210 (DT) and ZETOR 7520/7540, field by field
Field	4210 (DT)	7520/7540	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	IHC D-239	ZETOR Z-7801	differs
Displacement declared	3.91 L	4.16 L	+6% 7520/7540
Maximum torque declared	184 lb·ft · 250 N·m	176 lb·ft · 238 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry ZETOR single-disc clutch	—
Hydraulics & hitch
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,727 psi · 188 bar	—
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	9,442 lb · 4,283 kg	+48% 7520/7540
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	7,661 lb · 3,475 kg	+12% 7520/7540
Maximum permissible mass declared	—	12,566 lb · 5,700 kg	—
Wheelbase declared	88.7 in · 2,253 mm	93.5 in · 2,375 mm	+5% 7520/7540
Length declared	148.0 in · 3,759 mm	172.4 in · 4,380 mm	+17% 7520/7540
Width declared	73.0–92.7 in · 1,854–2,354 mm	78.5–90.4 in · 1,995–2,295 mm	differs
Height, over the cab declared	105.0 in · 2,666 mm	105.1 in · 2,670 mm	—
Ground clearance declared	—	21.1 in · 536 mm	—
Turning radius, braked declared	—	11.4 ft · 3.48 m	—
Fuel tank declared	118.3 qt · 112.0 L	111.0 qt · 105.0 L	+7% 4210 (DT)

Source

Source