8 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoSAME Dorado 70 (DT)1995–2000No measured PTO figure
Which should you choose?
Read our verdict on the 4210 (DT) and the Dorado 70 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 4210 (DT) | Dorado 70 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | IHC D-239 | SAME-DEUTZ-FAHR 1000.4 A 5 | differs |
| Displacement declared | 3.91 L | 4.00 L | — |
| Maximum torque declared | 184 lb·ft · 250 N·m | 170 lb·ft · 231 N·m | +8% 4210 (DT) |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.7 gpm · 40.5 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 2,176 psi · 150 bar | +24% 4210 (DT) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,832 lb · 3,099 kg | 5,908 lb · 2,680 kg | +16% 4210 (DT) |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 88.7 in · 2,253 mm | 88.0 in · 2,235 mm | — |
| Length declared | 148.0 in · 3,759 mm | 151.6 in · 3,850 mm | — |
| Width declared | 73.0–92.7 in · 1,854–2,354 mm | 75.6–91.3 in · 1,920–2,320 mm | — |
| Height, over the cab declared | 105.0 in · 2,666 mm | 95.3 in · 2,420 mm | +10% 4210 (DT) |
| Ground clearance declared | — | 17.5 in · 445 mm | — |
| Turning radius, braked declared | — | 10.5 ft · 3.20 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 95.1 qt · 90.0 L | +24% 4210 (DT) |
CASE-INTERNATIONAL 4210 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 4210”
SAME Dorado 70 (DT) sources
Source
- Source: Traktorenlexikon, “SAME Dorado 70”