8 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 4210 (DT)1993–1998No measured PTO figureTractor twoHürlimann H-607 XAfrom 1995No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

8 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 4210 (DT) and Hürlimann H-607 XA, field by field
Field	4210 (DT)	H-607 XA	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	IHC D-239	Hürlimann 1000.4 W-4	differs
Displacement declared	3.91 L	4.00 L	—
Maximum torque declared	184 lb·ft · 250 N·m	182 lb·ft · 247 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry SDF single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	12.3 gpm · 46.6 L/min	—
Pressure declared	2,698 psi · 186 bar	3,046 psi · 210 bar	+13% H-607 XA
Rear PTO speeds declared	540 rpm / 1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	6,460 lb · 2,930 kg	+6% 4210 (DT)
Wheelbase declared	88.7 in · 2,253 mm	86.2 in · 2,190 mm	—
Length declared	148.0 in · 3,759 mm	151.6 in · 3,850 mm	—
Width declared	73.0–92.7 in · 1,854–2,354 mm	76.0 in · 1,930 mm	differs
Height, over the cab declared	105.0 in · 2,666 mm	94.9 in · 2,410 mm	+11% 4210 (DT)
Ground clearance declared	—	14.2 in · 360 mm	—
Turning radius, braked declared	—	11.6 ft · 3.55 m	—
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 4210 (DT)

CASE-INTERNATIONAL 4210 (DT) sources

Source

Source: Traktorenlexikon, “Case-IH 4210”

Hürlimann H-607 XA sources