Case-IH Puma 210 vs Fendt 924 Vario

13 material differences

Tractor one

2007–2011

No measured PTO figure

Tractor two

2006–2014

No measured PTO figure

Which should you choose?

Read our verdict on the Puma 210 and the 924 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH Puma 210 and Fendt 924 Vario, field by field
Field	Puma 210	924 Vario	Gap
Engine
Engine power, claimed claimed	210.1 hp	207 hp	—
Engine declared	IVECO-NEF 667 TA	Deutz TCD 2013 LO6 4V	differs
Displacement declared	6.73 L	7.14 L	+6% 924 Vario
Maximum torque declared	622 lb·ft · 843 N·m	738 lb·ft · 1,000 N·m	+19% 924 Vario
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	31.1–37.3 mph · 50–60 km/h	differs
Clutch declared	Electro-hydraulically operated wet Case-New-Holland multi-disc driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	Load sensing	—
Pressure declared	2,756 psi · 190 bar	—	—
Three-point lift at ends declared	23,060 lb · 10,460 kg	—	—
Rear PTO speeds declared	540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,078 lb · 8,200 kg	22,223 lb · 10,080 kg	+23% 924 Vario
Maximum permissible mass declared	26,455 lb · 12,000 kg	33,069–39,683 lb · 15,000–18,000 kg	differs
Wheelbase declared	113.5 in · 2,884 mm	120.1 in · 3,050 mm	+6% 924 Vario
Length declared	201.2 in · 5,110 mm	222.6 in · 5,655 mm	+11% 924 Vario
Width declared	84.1 in · 2,135 mm	108.3 in · 2,750 mm	+29% 924 Vario
Height declared	120.1 in · 3,050 mm	130.8 in · 3,322 mm	+9% 924 Vario
Ground clearance declared	17.7 in · 450 mm	18.9 in · 480 mm	+7% 924 Vario
Turning radius, braked declared	—	19.9 ft · 6.08 m	—
Fuel tank declared	433.2 qt · 410.0 L	697.4 qt · 660 L	+61% 924 Vario

Source

Source