Case-IH Puma 140 vs Fendt 415 Vario

9 material differences · fewer than 12

Tractor one

2007–2011

No measured PTO figure

Tractor two

2006–2013

No measured PTO figure

Which should you choose?

Read our verdict on the Puma 140 and the 415 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH Puma 140 and Fendt 415 Vario, field by field
Field	Puma 140	415 Vario	Gap
Engine
Engine power, claimed claimed	140.0 hp	138 hp	—
Engine declared	IVECO-NEF 667 TA	Deutz TCD 2012 L4-4V	differs
Displacement declared	6.73 L	4.04 L	+67% Puma 140
Maximum torque declared	441 lb·ft · 598 N·m	481 lb·ft · 652 N·m	+9% 415 Vario
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	—	Turbo clutch function, driving clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	30.5 gpm · 115.6 L/min	—	—
Pressure declared	2,466 psi · 170 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/540E/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,889 lb · 6,300 kg	12,015 lb · 5,450 kg	+16% Puma 140
Maximum permissible mass declared	23,149 lb · 10,500 kg	—	—
Wheelbase declared	109.8 in · 2,789 mm	95.2 in · 2,417 mm	+15% Puma 140
Length declared	175.2 in · 4,449 mm	168.5 in · 4,281 mm	—
Width declared	85.2 in · 2,165 mm	98.0 in · 2,490 mm	+15% 415 Vario
Height declared	117.5 in · 2,985 mm	116.3 in · 2,953 mm	—
Ground clearance declared	18.7 in · 475 mm	20.2 in · 512 mm	+8% 415 Vario
Fuel tank declared	317.0 qt · 300.0 L	258.9 qt · 245 L	+22% Puma 140

Source

Source