11 material differences · fewer than 12

Tractor oneCase-IH MXM 1202002–2007No measured PTO figureTractor twoFendt Favorit 712 Variofrom 1999No measured PTO figure

Which should you choose?

Read our verdict on the MXM 120 and the Favorit 712 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH MXM 120 and Fendt Favorit 712 Vario, field by field
FieldMXM 120Favorit 712 VarioGap
Engine
Engine power, claimed claimed122.3 hp122.7 hp—
Engine declaredIVECO 675 TA/HDDeutz BF6M 2013 Cdiffers
Displacement declared7.48 L5.70 L+31% MXM 120
Maximum torque declared372 lb·ft · 505 N·m453 lb·ft · 613.8 N·m+22% Favorit 712 Vario
Transmission
Top speed declared24.9 mph · 40 km/h31.1 mph · 50 km/h+25% Favorit 712 Vario
Clutch declared—Multi-disc clutch—
Hydraulics & hitch
Hydraulic centre declaredClosed centreClosed centre—
Hydraulic control declaredLoad sensing——
Pump flow declared32.1 gpm · 121.5 L/min20.7 gpm · 78.5 L/min+55% MXM 120
Pressure declared2,466 psi · 170 bar2,466 psi · 170 bar—
Rear PTO speeds declared540E/540/1000 rpm540/750/1000 rpmdiffers
Weight & dimensions
Unladen weight declared11,995 lb · 5,441 kg12,566–13,603 lb · 5,700–6,170 kgdiffers
Maximum permissible mass declared18,739 lb · 8,500 kg20,944 lb · 9,500 kg+12% Favorit 712 Vario
Wheelbase declared107.2 in · 2,723 mm106.3 in · 2,700 mm—
Length declared184.8 in · 4,694 mm181.7–182.7 in · 4,615–4,640 mm—
Width declared79.2 in · 2,012 mm94.1–95.6 in · 2,390–2,429 mmdiffers
Ground clearance declared15.6 in · 395 mm20.8 in · 528 mm+34% Favorit 712 Vario
Turning radius, braked declared—16.1 ft · 4.90 m—
Fuel tank declared301.2 qt · 285.0 L317.0 qt · 300 L+5% Favorit 712 Vario

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Case-IH MXM 120 sources

Source
  • Source: Traktorenlexikon, “Case-IH MXM120”
  • Source: OECD test report 2086, 2003

Fendt Favorit 712 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 712 Vario”
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
  • Source: OECD test report 1943, 2000