Case-IH MXM 175 Maxxum vs John Deere 7710

8 material differences · fewer than 12

Tractor one

2002–2007

No measured PTO figure

Tractor two

1997–2003

151.4 hp

Measured at the PTO · OECD Test 1709

Which should you choose?

Read our verdict on the MXM 175 Maxxum and the 7710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH MXM 175 Maxxum and John Deere 7710, field by field
Field	MXM 175 Maxxum	7710	Gap
Measured performance
PTO power, measured measured	—	151.4 hp	—
Drawbar power, measured measured	—	137.5 hp	—
Engine
Engine power, claimed claimed	174.6 hp	—	—
Engine declared	IVECO 675 TA/FB	John Deere 6.081 TRW-02	differs
Displacement declared	7.48 L	8.13 L	+9% 7710
Maximum torque declared	512 lb·ft · 694 N·m	497 lb·ft · 674.0 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	electrohydraulically operated wet multi-plate clutch as driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	27.7 gpm · 105.0 L/min	26.8 gpm · 101.4 L/min	—
Pressure declared	2,683 psi · 185 bar	—	—
Three-point lift at ends declared	15,421 lb · 6,995 kg	—	—
Rear PTO speeds declared	540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	15,796 lb · 7,165 kg	13,278–15,448 lb · 6,023–7,007 kg	differs
Maximum permissible mass declared	26,455 lb · 12,000 kg	25,353 lb · 11,500 kg	—
Wheelbase declared	110.9 in · 2,818 mm	110.2–114.2 in · 2,800–2,900 mm	—
Length declared	191.5 in · 4,865 mm	187.2 in · 4,755 mm	—
Width declared	98.2 in · 2,495 mm	108.3 in · 2,750 mm	+10% 7710
Height declared	120.9 in · 3,070 mm	119.0 in · 3,023 mm	—
Ground clearance declared	15.2 in · 385 mm	20.3 in · 515 mm	+34% 7710
Fuel tank declared	411.1 qt · 389.0 L	285.9 qt · 270.6 L	+44% MXM 175 Maxxum

Source

Source