Case-IH MX 90 C vs VALMET 6250 HiTech

11 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

2000–2006

No measured PTO figure

Which should you choose?

Read our verdict on the MX 90 C and the 6250 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH MX 90 C and VALMET 6250 HiTech, field by field
Field	MX 90 C	6250 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	—	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	VALMET 420 DSRE or 44 DT	differs
Displacement declared	3.99 L	4.40 L	+10% 6250 HiTech
Maximum torque declared	236 lb·ft · 320 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet multi-plate driving clutch	Electrically operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.4 gpm · 88.4 L/min	19.4 gpm · 73.5 L/min	+20% MX 90 C
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% MX 90 C
Three-point lift at ends declared	—	12,588 lb · 5,710 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,199 lb · 5,080 kg	9,698 lb · 4,399 kg	+15% MX 90 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	19,842 lb · 9,000 kg	+15% 6250 HiTech
Wheelbase declared	95.4 in · 2,422 mm	91.6 in · 2,326 mm	—
Length declared	175.2 in · 4,450 mm	176.2 in · 4,475 mm	—
Width declared	92.8 in · 2,357 mm	85.8 in · 2,179 mm	+8% MX 90 C
Height declared	112.4 in · 2,855 mm	109.1 in · 2,771 mm	—
Ground clearance declared	15.2 in · 385 mm	17.1 in · 434 mm	+13% 6250 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	199.7 qt · 189.0 L	174.4 qt · 165.0 L	+15% MX 90 C

Source

Source