Case-IH MX 80 C vs Landini 8830 (DT) TL-23 N/E (TL-23 DT/F)

11 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the MX 80 C and the 8830 (DT) TL-23 N/E (TL-23 DT/F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH MX 80 C and Landini 8830 (DT) TL-23 N/E (TL-23 DT/F), field by field
Field	MX 80 C	8830 (DT) TL-23 N/E (TL-23 DT/F)	Gap
Engine
Engine power, claimed claimed	82.9 hp	78.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Perkins A 4.248	differs
Displacement declared	3.99 L	4.07 L	—
Maximum torque declared	218 lb·ft · 296 N·m	208 lb·ft · 282 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated wet Case-IH multi-disc driving clutch	Dry and air-cooled OMG double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	25.3 gpm · 95.6 L/min	9.3 gpm · 35.3 L/min	+171% MX 80 C
Pressure declared	3,408 psi · 235 bar	—	—
Three-point lift at ends declared	—	6,614 lb · 3,000 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	6,217 lb · 2,820 kg	+70% MX 80 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	—	—
Wheelbase declared	95.4 in · 2,422 mm	90.6 in · 2,300 mm	+5% MX 80 C
Length declared	163.8 in · 4,160 mm	151.6 in · 3,850 mm	+8% MX 80 C
Width declared	96.7 in · 2,455 mm	76.8 in · 1,950 mm	+26% MX 80 C
Height declared	110.6 in · 2,809 mm	94.7 in · 2,405 mm	+17% MX 80 C
Ground clearance declared	13.4 in · 340 mm	22.0 in · 560 mm	+65% 8830 (DT) TL-23 N/E (TL-23 DT/F)
Turning radius, braked declared	13.6 ft · 4.15 m	13.0 ft · 3.95 m	—
Fuel tank declared	207.1 qt · 196.0 L	63.9 qt · 60.5 L	+224% MX 80 C

Source

Source