13 material differences
Tractor oneCase-IH MX 1101997–2002104.3 hpMeasured at the PTO · OECD Test 1679Tractor twoJohn Deere 74101997–2002109.4 hpMeasured at the PTO · OECD Test 1750
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | MX 110 | 7410 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 104.3 hp | 109.4 hp | — |
| Drawbar power, measured measured | 86.1 hp | 98.2 hp | +14% 7410 |
| Engine | |||
| Engine declared | CDC 6T-590 | John Deere 6.068 TRW-51 | differs |
| Displacement declared | 5.88 L | 6.79 L | +15% 7410 |
| Maximum torque declared | 335 lb·ft · 454 N·m | 361 lb·ft · 490.0 N·m | +8% 7410 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Clutch declared | Wet Case-IH multi-disc clutch integrated in the transmission | Pedal-operated hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 28.8 gpm · 109.0 L/min | 26.9 gpm · 101.8 L/min | +7% MX 110 |
| Pressure declared | 3,408 psi · 235 bar | 2,538 psi · 175 bar | +34% MX 110 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,812 lb · 6,265 kg | 11,490–12,738 lb · 5,212–5,778 kg | differs |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | — | — |
| Wheelbase declared | 106.3 in · 2,700 mm | 103.3–111.8 in · 2,625–2,840 mm | — |
| Length declared | 184.1 in · 4,675 mm | 174.6 in · 4,435 mm | +5% MX 110 |
| Width declared | 92.9 in · 2,360 mm | 96.0–105.7 in · 2,438–2,686 mm | differs |
| Ground clearance declared | 15.9 in · 405 mm | 14.2–15.7 in · 360–400 mm | differs |
| Fuel tank declared | 277.9 qt · 263.0 L | 199.7 qt · 189.0 L | +39% MX 110 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH MX 110 sources
- Source: OECD test report 1679, 1997
- Source: OECD test report 1679, 1997
- Source: OECD test report 1678, 1997
- Source: Traktorenlexikon, “Case-IH MX110”
- Source: OECD test report 1691, 1997
John Deere 7410 sources
- Source: OECD test report 1750, 1998
- Source: Traktorenlexikon, “John Deere 7410”
- Source: OECD test report 1751, 1998