13 material differences
Tractor oneCase-IH Magnum 71101988–1993No measured PTO figureTractor twoNew Holland TM 155 (Traktorenlexikon)2002–2007No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (28%); they were not built in overlapping years (1988–1993; 2002–2007). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Magnum 7110 | TM 155 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 153 hp | 153 hp | — |
| Engine declared | CUMMINS 6 T-830 | NEW HOLLAND 675-TA/HA | differs |
| Displacement declared | 8.27 L | 7.48 L | +11% Magnum 7110 |
| Maximum torque declared | 421 lb·ft · 571 N·m | 462 lb·ft · 627 N·m | +10% TM 155 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | oil-immersed multiple-disc clutch | Electro-hydraulically operated multi-plate wet clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.4 gpm · 107.6 L/min | 32.1 gpm · 121.7 L/min | +13% TM 155 |
| Pressure declared | 2,944 psi · 203 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,590 lb · 7,525 kg | 12,919 lb · 5,860 kg | +28% Magnum 7110 |
| Maximum permissible mass declared | 24,912 lb · 11,300 kg | 19,842 lb · 9,000 kg | +26% Magnum 7110 |
| Wheelbase declared | 118.3 in · 3,006 mm | 107.2 in · 2,723 mm | +10% Magnum 7110 |
| Length declared | 197.6 in · 5,019 mm | 227.9 in · 5,789 mm | +15% TM 155 |
| Width declared | 112.0–120.8 in · 2,845–3,069 mm | 92.5 in · 2,350 mm | differs |
| Height, over the cab declared | 117.4 in · 2,982 mm | 117.1 in · 2,975 mm | — |
| Ground clearance declared | 15.9 in · 404 mm | 15.4 in · 390 mm | — |
| Turning radius, braked declared | 15.6 ft · 4.75 m | 17.1 ft · 5.20 m | +9% TM 155 |
| Fuel tank declared | 311.7 qt · 295.0 L | 301.2 qt · 285.0 L | — |
Case-IH Magnum 7110 sources
Source
- Source: Traktorenlexikon, “Case-IH 7110”
New Holland TM 155 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland TM 155”