Case-IH JX 85 (A) vs VALMET 800

10 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the JX 85 (A) and the 800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH JX 85 (A) and VALMET 800, field by field
Field	JX 85 (A)	800	Gap
Engine
Engine power, claimed claimed	78.9 hp	79 hp	—
Engine declared	IVECO 8045.05-406 (EURO II)	VALMET 420 DS or DSRE	differs
Displacement declared	3.91 L	4.40 L	+13% 800
Maximum torque declared	170 lb·ft · 230 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	11.9 gpm · 45.2 L/min	14.7 gpm · 55.7 L/min	+23% 800
Pressure declared	1,450 psi · 100 bar	2,901 psi · 200 bar	+100% 800
Three-point lift at ends declared	7,859 lb · 3,565 kg	7,419 lb · 3,365 kg	+6% JX 85 (A)
Rear PTO speeds declared	540E/540 rpm	540E/540 rpm	—
Weight & dimensions
Unladen weight declared	6,424 lb · 2,914 kg	7,341 lb · 3,330 kg	+14% 800
Wheelbase declared	90.7 in · 2,305 mm	88.3 in · 2,244 mm	—
Length declared	151.4 in · 3,845 mm	152.6 in · 3,877 mm	—
Width declared	77.4 in · 1,967 mm	85.7 in · 2,177 mm	+11% 800
Height declared	102.0 in · 2,590 mm	106.3 in · 2,700 mm	—
Ground clearance declared	13.6 in · 346 mm	19.9 in · 505 mm	+46% 800
Turning radius, braked declared	13.8 ft · 4.20 m	15.7 ft · 4.80 m	+14% 800
Fuel tank declared	95.1 qt · 90.0 L	83.5 qt · 79.0 L	+14% JX 85 (A)

Source

Source