Case-IH JX75 vs VALMET 4500

14 material differences

Tractor one

2002–2004

63.2 hp

Measured at the PTO · OECD Test 2628

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the JX75 and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH JX75 and VALMET 4500, field by field
Field	JX75	4500	Gap
Measured performance
PTO power, measured measured	63.2 hp	—	—
Drawbar power, measured measured	51.8 hp	—	—
Engine
Engine power, claimed claimed	—	74.0 hp	—
Engine declared	TTF 8045.25A.313T	VALMET 320 DS	differs
Displacement declared	3.91 L	3.30 L	+18% JX75
Maximum torque declared	207 lb·ft · 280.2 N·m	203 lb·ft · 275 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK double clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	10.3 gpm · 39.0 L/min	+23% 4500
Pressure declared	1,450 psi · 100 bar	2,901 psi · 200 bar	+100% 4500
Three-point lift at ends declared	7,859 lb · 3,565 kg	6,294 lb · 2,855 kg	+25% JX75
Rear PTO speeds declared	540E/540 rpm	540E/540 rpm	—
Weight & dimensions
Unladen weight declared	6,010–6,934 lb · 2,726–3,145 kg	6,217 lb · 2,820 kg	differs
Wheelbase declared	88.6–90.7 in · 2,250–2,305 mm	83.1 in · 2,112 mm	differs
Length declared	153.0 in · 3,885 mm	149.2 in · 3,790 mm	—
Width declared	75.9 in · 1,928 mm	81.5 in · 2,070 mm	+7% 4500
Height declared	102.0 in · 2,590 mm	95.1 in · 2,415 mm	+7% JX75
Ground clearance declared	10.6 in · 270 mm	19.9 in · 505 mm	+87% 4500
Turning radius, braked declared	13.8 ft · 4.20 m	12.8 ft · 3.90 m	+8% JX75
Fuel tank declared	95.1 qt · 90.0 L	100.4 qt · 95.0 L	+6% 4500

Source

Source