Case-IH JX75 vs Renault Ceres 325

12 material differences

Tractor one

2002–2004

63.2 hp

Measured at the PTO · OECD Test 2628

Tractor two

2000–2004

60.7 hp

Measured at the PTO · OECD Test 1968

Which should you choose?

Read our verdict on the JX75 and the Ceres 325 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH JX75 and Renault Ceres 325, field by field
Field	JX75	Ceres 325	Gap
Measured performance
PTO power, measured measured	63.2 hp	60.7 hp	—
Drawbar power, measured measured	51.8 hp	49.8 hp	—
Engine
Engine declared	TTF 8045.25A.313T	John Deere 4045 DRT 50	differs
Displacement declared	3.91 L	4.53 L	+16% Ceres 325
Maximum torque declared	207 lb·ft · 280.2 N·m	195 lb·ft · 264.9 N·m	+6% JX75
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	13.2 gpm · 50.1 L/min	+58% Ceres 325
Pressure declared	1,450 psi · 100 bar	—	—
Three-point lift at ends declared	7,859 lb · 3,565 kg	6,327 lb · 2,870 kg	+24% JX75
Rear PTO speeds declared	540E/540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,010–6,934 lb · 2,726–3,145 kg	7,760–8,058 lb · 3,520–3,655 kg	differs
Maximum permissible mass declared	—	12,258 lb · 5,560 kg	—
Wheelbase declared	88.6–90.7 in · 2,250–2,305 mm	95.8–97.2 in · 2,433–2,470 mm	differs
Length declared	153.0 in · 3,885 mm	176.4 in · 4,481 mm	+15% Ceres 325
Width declared	75.9 in · 1,928 mm	73.2 in · 1,860 mm	—
Height declared	102.0 in · 2,590 mm	101.8 in · 2,586 mm	—
Ground clearance declared	10.6 in · 270 mm	21.3–23.6 in · 540–600 mm	differs
Turning radius, braked declared	13.8 ft · 4.20 m	12.8–13.3 ft · 3.90–4.04 m	differs
Fuel tank declared	95.1 qt · 90.0 L	158.5 qt · 150.0 L	+67% Ceres 325

Source

Source