14 material differences
Tractor oneCase-IH JX752002–200463.2 hpMeasured at the PTO · OECD Test 2628Tractor twoJohn Deere 53032003–200860.2 hpMeasured at the PTO · OECD Test 2268
Which should you choose?
Read our verdict on the JX75 and the 5303 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | JX75 | 5303 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 63.2 hp | 60.2 hp | — |
| Drawbar power, measured measured | 51.8 hp | 46.9 hp | +10% JX75 |
| Engine | |||
| Engine declared | TTF 8045.25A.313T | John Deere 3.029 TPY-11 | differs |
| Displacement declared | 3.91 L | 2.90 L | +35% JX75 |
| Maximum torque declared | 207 lb·ft · 280.2 N·m | 161 lb·ft · 218.6 N·m | +28% JX75 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry LuK double clutch | Dry LuK double clutch with 280 mm diameter | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 8.4 gpm · 31.8 L/min | 10.8 gpm · 41.0 L/min | +29% 5303 |
| Pressure declared | 1,450 psi · 100 bar | — | — |
| Rear PTO speeds declared | 540E/540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,010–6,934 lb · 2,726–3,145 kg | 4,894–5,110 lb · 2,220–2,318 kg | differs |
| Wheelbase declared | 88.6–90.7 in · 2,250–2,305 mm | 80.3 in · 2,040 mm | differs |
| Length declared | 153.0 in · 3,885 mm | 138.4 in · 3,515 mm | +11% JX75 |
| Width declared | 75.9–95.6 in · 1,928–2,428 mm | 73.4–89.6 in · 1,865–2,275 mm | differs |
| Ground clearance declared | 10.6 in · 270 mm | 15.0 in · 380 mm | +41% 5303 |
| Turning radius, braked declared | 13.8 ft · 4.20 m | — | — |
| Fuel tank declared | 95.1 qt · 90.0 L | 72.0 qt · 68.1 L | +32% JX75 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH JX75 sources
Source
- Source: OECD test report 2628, 2011
- Source: OECD test report 2629, 2011
- Source: Traktorenlexikon, “Case-IH JX75”
John Deere 5303 sources
Source
- Source: OECD test report 2268, 2005
- Source: Traktorenlexikon, “John Deere 5303”