Case-IH JX 65 (A) vs VALMET 600

11 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the JX 65 (A) and the 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH JX 65 (A) and VALMET 600, field by field
Field	JX 65 (A)	600	Gap
Engine
Engine power, claimed claimed	61.2 hp	59.1 hp	—
Engine declared	IVECO 8035.05-406 (EURO II)	VALMET 320 D	differs
Displacement declared	2.93 L	3.30 L	+13% 600
Maximum torque declared	130 lb·ft · 176 N·m	162 lb·ft · 220 N·m	+25% 600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	8.7 gpm · 33.1 L/min	14.7 gpm · 55.7 L/min	+68% 600
Pressure declared	1,450 psi · 100 bar	2,901 psi · 200 bar	+100% 600
Three-point lift at ends declared	7,859 lb · 3,565 kg	6,294 lb · 2,855 kg	+25% JX 65 (A)
Rear PTO speeds declared	540E/540 rpm	540E/540 rpm	—
Weight & dimensions
Unladen weight declared	6,010 lb · 2,726 kg	6,900 lb · 3,130 kg	+15% 600
Wheelbase declared	85.6 in · 2,175 mm	83.1 in · 2,112 mm	—
Length declared	142.4 in · 3,618 mm	147.4 in · 3,745 mm	—
Width declared	70.8 in · 1,799 mm	84.2 in · 2,139 mm	+19% 600
Height declared	100.6 in · 2,555 mm	104.7 in · 2,660 mm	—
Ground clearance declared	10.8 in · 275 mm	19.9 in · 505 mm	+84% 600
Turning radius, braked declared	13.8 ft · 4.20 m	11.5 ft · 3.50 m	+20% JX 65 (A)
Fuel tank declared	95.1 qt · 90.0 L	83.5 qt · 79.0 L	+14% JX 65 (A)

Source

Source