11 material differences · fewer than 12

Tractor oneCase-IH JX 65 (A)2002–2004No measured PTO figureTractor twoJohn Deere 1950 (A)1987–1994No measured PTO figure

Which should you choose?

Read our verdict on the JX 65 (A) and the 1950 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH JX 65 (A) and John Deere 1950 (A), field by field
Field	JX 65 (A)	1950 (A)	Gap
Engine
Engine power, claimed claimed	61.2 hp	61.2 hp	—
Engine declared	IVECO 8035.05-406 (EURO II)	John Deere 3.179 TL-001	differs
Displacement declared	2.93 L	2.94 L	—
Maximum torque declared	130 lb·ft · 176 N·m	185 lb·ft · 251 N·m	+43% 1950 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Pedal operated dry Fichtel & Sachs single disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Closed centre	differs
Pump flow declared	8.7 gpm · 33.1 L/min	13.3 gpm · 50.2 L/min	+52% 1950 (A)
Pressure declared	1,450 psi · 100 bar	3,336 psi · 230 bar	+130% 1950 (A)
Rear PTO speeds declared	540E/540 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,010 lb · 2,726 kg	6,151 lb · 2,790 kg	—
Maximum permissible mass declared	—	9,259 lb · 4,200 kg	—
Wheelbase declared	85.6 in · 2,175 mm	84.7 in · 2,151 mm	—
Length declared	142.4 in · 3,618 mm	148.2 in · 3,764 mm	—
Width declared	70.8–90.5 in · 1,799–2,299 mm	73.0 in · 1,854 mm	differs
Height, over the cab declared	100.6 in · 2,555 mm	95.8 in · 2,433 mm	—
Ground clearance declared	10.8 in · 275 mm	24.4 in · 621 mm	+126% 1950 (A)
Turning radius, braked declared	13.8 ft · 4.20 m	10.8 ft · 3.29 m	+28% JX 65 (A)
Fuel tank declared	95.1 qt · 90.0 L	76.1 qt · 72.0 L	+25% JX 65 (A)

Source

Source