Case-IH JX 1060 C vs John Deere 5603
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the JX 1060 C and the 5603 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | JX 1060 C | 5603 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 97.8 hp | +80% 5603 |
| Engine declared | IVECO 8035.05 C (EURO II) | John Deere 4.045 | differs |
| Displacement declared | 2.93 L | 4.52 L | +54% 5603 |
| Maximum torque declared | 147 lb·ft · 199 N·m | 253 lb·ft · 343 N·m | +72% 5603 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | — | Pedal-operated dry single-disc driving clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 13.8 gpm · 52.1 L/min | 16.7 gpm · 63.2 L/min | +21% 5603 |
| Pressure declared | — | 3,408 psi · 235 bar | — |
| Three-point lift at ends declared | — | 4,674 lb · 2,120 kg | — |
| Rear PTO speeds declared | 540E/540/1000E/1000 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,978 lb · 3,165 kg | 7,319 lb · 3,320 kg | — |
| Maximum permissible mass declared | 10,582 lb · 4,800 kg | — | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 85.7 in · 2,177 mm | — |
| Length declared | 144.2 in · 3,662 mm | 147.2 in · 3,740 mm | — |
| Width declared | 73.5 in · 1,867 mm | 74.0 in · 1,880 mm | — |
| Height declared | 94.9 in · 2,410 mm | 98.8 in · 2,510 mm | — |
| Ground clearance declared | 13.9 in · 353 mm | — | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 72.0 qt · 68.1 L | — |
Case-IH JX 1060 C sources
Source
- Source: Traktorenlexikon, “Case-IH JX1060C”
John Deere 5603 sources
Source
- Source: Traktorenlexikon, “John Deere 5603”