11 material differences · fewer than 12

Tractor oneCase-IH CX 901998–2000No measured PTO figureTractor twoVALMET 6350 HiTech1999–2006No measured PTO figure

Which should you choose?

Read our verdict on the CX 90 and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CX 90 and VALMET 6350 HiTech, field by field
Field	CX 90	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	3.99 L	4.40 L	+10% 6350 HiTech
Maximum torque declared	235 lb·ft · 319 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	17.0 gpm · 64.3 L/min	18.5 gpm · 70.0 L/min	+9% 6350 HiTech
Pressure declared	2,698 psi · 186 bar	2,901 psi · 200 bar	+8% 6350 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,168 lb · 3,705 kg	10,516 lb · 4,770 kg	+29% 6350 HiTech
Maximum permissible mass declared	13,228 lb · 6,000 kg	19,842 lb · 9,000 kg	+50% 6350 HiTech
Wheelbase declared	92.8 in · 2,356 mm	91.6 in · 2,326 mm	—
Length declared	156.7 in · 3,980 mm	180.5 in · 4,585 mm	+15% 6350 HiTech
Width declared	84.6 in · 2,150 mm	92.3 in · 2,345 mm	+9% 6350 HiTech
Height, over the cab declared	99.2 in · 2,520 mm	110.2 in · 2,800 mm	+11% 6350 HiTech
Ground clearance declared	13.0 in · 330 mm	17.1 in · 434 mm	+32% 6350 HiTech
Turning radius, braked declared	14.7 ft · 4.48 m	15.3 ft · 4.65 m	—
Fuel tank declared	163.8 qt · 155.0 L	174.4 qt · 165.0 L	+6% 6350 HiTech

Source

Source