Case-IH CX 80 vs Renault Ceres 95 (A)

10 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the CX 80 and the Ceres 95 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH CX 80 and Renault Ceres 95 (A), field by field
Field	CX 80	Ceres 95 (A)	Gap
Engine
Engine power, claimed claimed	82.9 hp	81.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	MWM D 226-4	differs
Displacement declared	3.99 L	4.15 L	—
Maximum torque declared	225 lb·ft · 305 N·m	204 lb·ft · 276 N·m	+11% CX 80
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	16.1 gpm · 60.8 L/min	12.0 gpm · 45.3 L/min	+34% CX 80
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	8,543 lb · 3,875 kg	10,075 lb · 4,570 kg	+18% Ceres 95 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	7,341 lb · 3,330 kg	+18% CX 80
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.8 in · 2,356 mm	95.7 in · 2,430 mm	—
Length declared	156.7 in · 3,980 mm	152.4 in · 3,870 mm	—
Width declared	82.7 in · 2,100 mm	73.2 in · 1,860 mm	+13% CX 80
Height declared	99.2 in · 2,520 mm	100.4 in · 2,550 mm	—
Ground clearance declared	13.0 in · 330 mm	19.3 in · 490 mm	+48% Ceres 95 (A)
Turning radius, braked declared	14.7 ft · 4.48 m	12.5 ft · 3.80 m	+18% CX 80
Fuel tank declared	163.8 qt · 155.0 L	155.3 qt · 147.0 L	+5% CX 80

Source

Source