7 material differences · fewer than 12

Tractor oneCase-IH CX 801998–2000No measured PTO figureTractor twoLandini 7800-Turbo (DT)1987–2000No measured PTO figure

Which should you choose?

Read our verdict on the CX 80 and the 7800-Turbo (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 10 fields identical or within 5%, which is not counted as material

Case-IH CX 80 and Landini 7800-Turbo (DT), field by field
Field	CX 80	7800-Turbo (DT)	Gap
Engine
Engine power, claimed claimed	82.9 hp	82.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Perkins LT 4.236	differs
Displacement declared	3.99 L	3.86 L	—
Maximum torque declared	225 lb·ft · 305 N·m	237 lb·ft · 322 N·m	+6% 7800-Turbo (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	13.5 gpm · 51.0 L/min	+19% CX 80
Pressure declared	2,698 psi · 186 bar	2,901 psi · 200 bar	+8% 7800-Turbo (DT)
Three-point lift, at the coupling points declared	8,543 lb · 3,875 kg	7,804 lb · 3,540 kg	+9% CX 80
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	8,411 lb · 3,815 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	92.8 in · 2,356 mm	93.3 in · 2,371 mm	—
Length declared	156.7 in · 3,980 mm	157.1 in · 3,990 mm	—
Width declared	82.7 in · 2,100 mm	81.5 in · 2,070 mm	—
Height, over the cab declared	99.2 in · 2,520 mm	108.7 in · 2,760 mm	+10% 7800-Turbo (DT)
Ground clearance declared	13.0 in · 330 mm	13.1 in · 332 mm	—
Turning radius, braked declared	14.7 ft · 4.48 m	—	—
Fuel tank declared	163.8 qt · 155.0 L	156.4 qt · 148.0 L	—

Source

Source