Case-IH CX 80 vs Deutz-Fahr Agroplus 85

7 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1997–2005

No measured PTO figure

Which should you choose?

Read our verdict on the CX 80 and the Agroplus 85 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CX 80 and Deutz-Fahr Agroplus 85, field by field
Field	CX 80	Agroplus 85	Gap
Engine
Engine power, claimed claimed	82.9 hp	82.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	—	—
Displacement declared	3.99 L	—	—
Maximum torque declared	225 lb·ft · 305 N·m	250 lb·ft · 339 N·m	+11% Agroplus 85
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	16.1 gpm · 60.8 L/min	—	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	8,543 lb · 3,875 kg	10,803 lb · 4,900 kg	+26% Agroplus 85
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	8,378 lb · 3,800 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,669 lb · 6,200 kg	—
Wheelbase declared	92.8 in · 2,356 mm	92.1 in · 2,340 mm	—
Length declared	156.7 in · 3,980 mm	146.2 in · 3,714 mm	+7% CX 80
Width declared	82.7 in · 2,100 mm	81.1 in · 2,060 mm	—
Height declared	99.2 in · 2,520 mm	103.3 in · 2,624 mm	—
Ground clearance declared	13.0 in · 330 mm	18.6 in · 472 mm	+43% Agroplus 85
Turning radius, braked declared	14.7 ft · 4.48 m	—	—
Fuel tank declared	163.8 qt · 155.0 L	147.9 qt · 140 L	+11% CX 80

Source

Source