Case-IH CX 100 vs ZETOR 11641

12 material differences

Tractor one

1998–2000

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the 11641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and ZETOR 11641, field by field
Field	CX 100	11641	Gap
Engine
Engine power, claimed claimed	101 hp	108.5 hp	+8% 11641
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	SDF 1000.6 W or 1000.6 W 2T	differs
Displacement declared	3.99 L	6.00 L	+50% 11641
Maximum torque declared	268 lb·ft · 364 N·m	288 lb·ft · 390 N·m	+7% 11641
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	Pedal-operated dry Zetor single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	17.2 gpm · 65.0 L/min	+7% 11641
Pressure declared	2,698 psi · 186 bar	1,813 psi · 125 bar	+49% CX 100
Three-point lift at ends declared	8,455 lb · 3,835 kg	11,938 lb · 5,415 kg	+41% 11641
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	10,240 lb · 4,645 kg	+10% 11641
Maximum permissible mass declared	13,228 lb · 6,000 kg	17,196 lb · 7,800 kg	+30% 11641
Wheelbase declared	92.8 in · 2,356 mm	104.1 in · 2,643 mm	+12% 11641
Length declared	176.0 in · 4,470 mm	179.1 in · 4,550 mm	—
Width declared	83.1 in · 2,110 mm	86.8 in · 2,205 mm	—
Height declared	108.1 in · 2,745 mm	107.7 in · 2,735 mm	—
Ground clearance declared	13.0 in · 330 mm	14.4 in · 367 mm	+11% 11641
Turning radius, braked declared	19.7 ft · 6.01 m	—	—
Fuel tank declared	163.8 qt · 155.0 L	190.2 qt · 180.0 L	+16% 11641

Source

Source