Case-IH CX 100 vs Massey Ferguson MF 3085 A

12 material differences

Tractor one

1998–2000

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the MF 3085 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and Massey Ferguson MF 3085 A, field by field
Field	CX 100	MF 3085 A	Gap
Engine
Engine power, claimed claimed	101 hp	98.7 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Perkins 1006.6 HR-4	differs
Displacement declared	3.99 L	5.99 L	+50% MF 3085 A
Maximum torque declared	268 lb·ft · 364 N·m	280 lb·ft · 379 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	Pedal-operated, dry and air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	14.3 gpm · 54.0 L/min	+13% CX 100
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	8,455 lb · 3,835 kg	7,891 lb · 3,579 kg	+7% CX 100
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	10,472 lb · 4,750 kg	+12% MF 3085 A
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% MF 3085 A
Wheelbase declared	92.8 in · 2,356 mm	106.3 in · 2,699 mm	+15% MF 3085 A
Length declared	176.0 in · 4,470 mm	170.2 in · 4,323 mm	—
Width declared	83.1 in · 2,110 mm	74.8 in · 1,899 mm	+11% CX 100
Height declared	108.1 in · 2,745 mm	109.2 in · 2,774 mm	—
Ground clearance declared	13.0 in · 330 mm	17.7 in · 450 mm	+36% MF 3085 A
Turning radius, braked declared	19.7 ft · 6.01 m	—	—
Fuel tank declared	163.8 qt · 155.0 L	182.8 qt · 173.0 L	+12% MF 3085 A

Source

Source