11 material differences · fewer than 12

Tractor oneCase-IH CX 1001998–2000No measured PTO figureTractor twoJohn Deere 7200 (A)1993–1997No measured PTO figure

Which should you choose?

Read our verdict on the CX 100 and the 7200 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CX 100 and John Deere 7200 (A), field by field
Field	CX 100	7200 (A)	Gap
Engine
Engine power, claimed claimed	101 hp	100.7 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	John Deere 6.059 TRW-01 or 6.068 TRW-01	differs
Displacement declared	3.99 L	—	—
Maximum torque declared	268 lb·ft · 364 N·m	311 lb·ft · 421 N·m	+16% 7200 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch as driving clutch	Pedal-operated, hydraulic wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	16.1 gpm · 60.8 L/min	26.2 gpm · 99.2 L/min	+63% 7200 (A)
Pressure declared	2,698 psi · 186 bar	2,538 psi · 175 bar	+6% CX 100
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,337 lb · 4,235 kg	12,679 lb · 5,751 kg	+36% 7200 (A)
Maximum permissible mass declared	13,228 lb · 6,000 kg	19,842 lb · 9,000 kg	+50% 7200 (A)
Wheelbase declared	92.8 in · 2,356 mm	112.2 in · 2,850 mm	+21% 7200 (A)
Length declared	176.0 in · 4,470 mm	174.6 in · 4,435 mm	—
Width declared	83.1 in · 2,110 mm	96.0–105.7 in · 2,438–2,686 mm	differs
Height, over the cab declared	108.1 in · 2,745 mm	113.4 in · 2,880 mm	—
Ground clearance declared	13.0 in · 330 mm	14.2 in · 360 mm	+9% 7200 (A)
Turning radius, braked declared	19.7 ft · 6.01 m	—	—
Fuel tank declared	163.8 qt · 155.0 L	215.6 qt · 204.0 L	+32% 7200 (A)

Source

Source