Case-IH CX 50 vs Landini 5830 (DT) TL-22 N/G (TL-DT/L)
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the CX 50 and the 5830 (DT) TL-22 N/G (TL-DT/L) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | CX 50 | 5830 (DT) TL-22 N/G (TL-DT/L) | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 42.5 hp | — | — |
| Drawbar power, measured measured | 35.4 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 49.3 hp | — |
| Engine declared | Perkins 1962/2250 | Perkins AD 3.152 S | differs |
| Displacement declared | 2.70 L | 2.50 L | +8% CX 50 |
| Maximum torque declared | 121 lb·ft · 164.0 N·m | 133 lb·ft · 181 N·m | +10% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-disc clutch | Dry, air-cooled OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.0 gpm · 53.0 L/min | 9.5 gpm · 36.1 L/min | +47% CX 50 |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift at ends declared | 4,451 lb · 2,019 kg | 4,519 lb · 2,050 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,110 lb · 3,225 kg | 4,674 lb · 2,120 kg | +52% CX 50 |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | — | — |
| Wheelbase declared | 84.8 in · 2,154 mm | 81.9 in · 2,080 mm | — |
| Length declared | 150.8 in · 3,830 mm | 140.7 in · 3,575 mm | +7% CX 50 |
| Width declared | 79.5 in · 2,020 mm | 69.1 in · 1,755 mm | +15% CX 50 |
| Height declared | 97.2 in · 2,470 mm | 89.6 in · 2,275 mm | +9% CX 50 |
| Ground clearance declared | 12.4 in · 315 mm | 17.1 in · 435 mm | +38% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Turning radius, braked declared | — | 12.4 ft · 3.79 m | — |
| Fuel tank declared | 163.8 qt · 155.0 L | 63.9 qt · 60.5 L | +156% CX 50 |
Case-IH CX 50 sources
Source
- Source: OECD test report 1893, 2000
- Source: Traktorenlexikon, “Case-IH CX50”
Landini 5830 (DT) TL-22 N/G (TL-DT/L) sources
Source
- Source: Traktorenlexikon, “Landini 5830 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”