13 material differences
Tractor oneCase-IH CX 501998–200042.5 hpMeasured at the PTO · OECD Test 1893Tractor twoJohn Deere 1750 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the CX 50 and the 1750 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | CX 50 | 1750 (A) | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 42.5 hp | — | — |
| Drawbar power, measured measured | 35.4 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 49.3 hp | — |
| Engine declared | Perkins 1962/2250 | John Deere 3179 DL | differs |
| Displacement declared | 2.70 L | 2.94 L | +9% 1750 (A) |
| Maximum torque declared | 121 lb·ft · 164.0 N·m | 136 lb·ft · 185 N·m | +13% 1750 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated dry single-disc clutch | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 14.0 gpm · 53.0 L/min | 5.8 gpm · 22.0 L/min | +141% CX 50 |
| Pressure declared | 2,698 psi · 186 bar | 2,857 psi · 197 bar | +6% 1750 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,110 lb · 3,225 kg | 5,644 lb · 2,560 kg | +26% CX 50 |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | 8,818 lb · 4,000 kg | +50% CX 50 |
| Wheelbase declared | 84.8 in · 2,154 mm | 80.7 in · 2,050 mm | — |
| Length declared | 150.8 in · 3,830 mm | 147.8 in · 3,754 mm | — |
| Width declared | 79.5 in · 2,020 mm | 72.6 in · 1,845 mm | +9% CX 50 |
| Ground clearance declared | 12.4 in · 315 mm | 24.1 in · 612 mm | +94% 1750 (A) |
| Fuel tank declared | 163.8 qt · 155.0 L | 82.4 qt · 78.0 L | +99% CX 50 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH CX 50 sources
Source
- Source: OECD test report 1893, 2000
- Source: Traktorenlexikon, “Case-IH CX50”
John Deere 1750 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 1750”