6 material differences · fewer than 12
Tractor oneCase-IH CS-68 (A)1994–2004No measured PTO figureTractor twoNew Holland TD 70 D (A)2002–2008No measured PTO figure
Which should you choose?
Read our verdict on the CS-68 (A) and the TD 70 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | CS-68 (A) | TD 70 D (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 68.0 hp | — |
| Engine declared | MWM 301.89 T | IVECO 8035.25 C | differs |
| Displacement declared | — | 2.93 L | — |
| Maximum torque declared | — | 173 lb·ft · 234 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry double clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | 11.4 gpm · 43.0 L/min | — |
| Pressure declared | — | 3,553 psi · 245 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 6,010 lb · 2,726 kg | — |
| Wheelbase declared | 87.0 in · 2,209 mm | 85.6 in · 2,175 mm | — |
| Length declared | 145.7 in · 3,700 mm | 145.1 in · 3,685 mm | — |
| Width declared | 74.8 in · 1,900 mm | 70.8–90.5 in · 1,799–2,299 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 14.6 in · 371 mm | +8% CS-68 (A) |
| Fuel tank declared | 87.7 qt · 83.0 L | 95.1 qt · 90.0 L | +8% TD 70 D (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH CS-68 (A) sources
- Source: Traktorenlexikon, “Case-IH CS68/a”
- Source: Traktorenlexikon, “Steyr M 968”
New Holland TD 70 D (A) sources
- Source: Traktorenlexikon, “New Holland TD 70 D”