Case-IH CS-63 vs UTB U-643 DT
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the CS-63 and the U-643 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | CS-63 | U-643 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62.2 hp | 63.2 hp | — |
| Engine declared | PERKINS 903-27 T | UTB D-121.050 | differs |
| Displacement declared | 2.70 L | 3.60 L | +33% U-643 DT |
| Maximum torque declared | 176 lb·ft · 239 N·m | 158 lb·ft · 214 N·m | +12% CS-63 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry double clutch | Dry UTB double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.1 gpm · 30.8 L/min | 9.0 gpm · 34.0 L/min | +10% U-643 DT |
| Pressure declared | — | 2,031 psi · 140 bar | — |
| Three-point lift at ends declared | 5,556 lb · 2,520 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,490 lb · 2,490 kg | 6,889 lb · 3,125 kg | +26% U-643 DT |
| Wheelbase declared | 83.3 in · 2,117 mm | 89.4 in · 2,270 mm | +7% U-643 DT |
| Length declared | 139.0 in · 3,530 mm | 148.4 in · 3,770 mm | +7% U-643 DT |
| Width declared | 74.8 in · 1,900 mm | 72.4 in · 1,839 mm | — |
| Height declared | 92.9 in · 2,360 mm | 98.4 in · 2,500 mm | +6% U-643 DT |
| Ground clearance declared | — | 12.6 in · 320 mm | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 65.5 qt · 62.0 L | +18% CS-63 |
Case-IH CS-63 sources
Source
- Source: Traktorenlexikon, “Case-IH CS63/a”
- Source: Traktorenlexikon, “Case-IH CS52/a”
UTB U-643 DT sources
Source
- Source: Traktorenlexikon, “UTB U 643 DT”
- Source: Traktorenlexikon, “UTB U 640”