9 material differences · fewer than 12
Tractor oneCase-IH MX 1001997–2002No measured PTO figureTractor twoNew Holland 81601996–1999No measured PTO figure
Which should you choose?
Read our verdict on the MX 100 and the 8160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | MX 100 | 8160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | CUMMINS CDC 6T-590 | NEW HOLLAND 675-TC | differs |
| Displacement declared | 5.88 L | 7.48 L | +27% 8160 |
| Maximum torque declared | 312 lb·ft · 423 N·m | 297 lb·ft · 403 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Wet CASE-IH multi-disc clutch integrated in the gearbox | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 28.8 gpm · 109.0 L/min | 26.3 gpm · 99.6 L/min | +9% MX 100 |
| Pressure declared | 3,408 psi · 235 bar | 2,408–2,582 psi · 166–178 bar | differs |
| Three-point lift, at the coupling points declared | 12,950 lb · 5,874 kg | 10,803 lb · 4,900 kg | +20% MX 100 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,812 lb · 6,265 kg | 11,574 lb · 5,250 kg | +19% MX 100 |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | 16,535 lb · 7,500 kg | +20% MX 100 |
| Wheelbase declared | 106.3 in · 2,700 mm | 107.2 in · 2,723 mm | — |
| Length declared | 184.1 in · 4,675 mm | 179.5 in · 4,560 mm | — |
| Width declared | 92.9 in · 2,360 mm | 92.5 in · 2,350 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 14.2 in · 360 mm | +8% MX 100 |
| Fuel tank declared | 277.9 qt · 263.0 L | 232.5 qt · 220.0 L | +20% MX 100 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH MX 100 sources
Source
- Source: Traktorenlexikon, “Case-IH MX100”
- Source: Traktorenlexikon, “Case-IH MX135”
- Source: OECD test report 1693, 1997
New Holland 8160 sources
Source
- Source: Traktorenlexikon, “New Holland 8160”