6 material differences · fewer than 12
Tractor oneCase-IH Magnum 2802005–2011No measured PTO figureTractor twoJohn Deere 8410 T2000–2002No measured PTO figure
Which should you choose?
Read our verdict on the Magnum 280 and the 8410 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Magnum 280 | 8410 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 275 hp | 266.5 hp | — |
| Engine declared | — | John Deere-PowerTech 6.081 HRW-18 | — |
| Displacement declared | — | 8.13 L | — |
| Maximum torque declared | 949 lb·ft · 1,287 N·m | 844 lb·ft · 1,144 N·m | +13% Magnum 280 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% Magnum 280 |
| Clutch declared | — | Pedal operated hydraulic wet John Deere multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 43.9 gpm · 166 L/min | 31.4 gpm · 118.9 L/min | +40% Magnum 280 |
| Pressure declared | 3,046 psi · 210 bar | 2,944 psi · 203 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 28,440 lb · 12,900 kg | 26,378 lb · 11,965 kg | +8% Magnum 280 |
| Maximum permissible mass declared | — | 31,500 lb · 14,288 kg | — |
| Wheelbase declared | 118.5 in · 3,010 mm | 89.0 in · 2,260 mm | +33% Magnum 280 |
| Length declared | 234.3 in · 5,950 mm | 216.0 in · 5,487 mm | +8% Magnum 280 |
| Width declared | — | 134.0–150.0 in · 3,404–3,810 mm | — |
| Ground clearance declared | — | 14.2 in · 360 mm | — |
| Fuel tank declared | — | 519.9 qt · 492.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH Magnum 280 sources
- Source: Traktorenlexikon, “Case-IH Magnum 280”
- Source: OECD test report 2979, 2016
John Deere 8410 T sources
- Source: Traktorenlexikon, “John Deere 8410T”
- Source: OECD test report 1937, 2000