Case-IH 7240 PRO/8940 vs John Deere 8130

13 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

2006–2009

208.3 hp

Measured at the PTO · OECD Test 2376

Which should you choose?

Read our verdict on the 7240 PRO/8940 and the 8130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH 7240 PRO/8940 and John Deere 8130, field by field
Field	7240 PRO/8940	8130	Gap
Measured performance
PTO power, measured measured	—	208.3 hp	—
Drawbar power, measured measured	—	184.5 hp	—
Engine
Engine power, claimed claimed	235.8 hp	—	—
Engine declared	CUMMINS 6 TA-830	John Deere 6090HRW01	differs
Displacement declared	8.27 L	8.98 L	+9% 8130
Maximum torque declared	725 lb·ft · 983 N·m	674 lb·ft · 914.0 N·m	+8% 7240 PRO/8940
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Case-IH multi-plate clutch running in oil bath	Pedal-operated hydraulic wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	29.7 gpm · 112.4 L/min	—	—
Pressure declared	2,451 psi · 169 bar	3,336 psi · 230 bar	+36% 8130
Three-point lift at ends declared	15,759 lb · 7,148 kg	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,170 lb · 8,242 kg	21,319–23,307 lb · 9,670–10,572 kg	differs
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,865 lb · 14,000 kg	+21% 8130
Wheelbase declared	118.3 in · 3,006 mm	120.1–126.8 in · 3,050–3,220 mm	differs
Length declared	200.4 in · 5,090 mm	233.8 in · 5,938 mm	+17% 8130
Width declared	120.0 in · 3,048 mm	118.6 in · 3,012 mm	—
Height declared	121.1 in · 3,077 mm	124.2 in · 3,155 mm	—
Ground clearance declared	19.3 in · 489 mm	13.2–17.3 in · 336–440 mm	differs
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	720.0 qt · 681.4 L	differs

Source

Source