10 material differences · fewer than 12
Tractor oneCase-IH 7240 PRO/89401997–1999No measured PTO figureTractor twoJ.I. Case 46941984–1985No measured PTO figure
Which should you choose?
Read our verdict on the 7240 PRO/8940 and the 4694 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7240 PRO/8940 | 4694 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 235.8 hp | 232.8 hp | — |
| Engine declared | CUMMINS 6 TA-830 | CASE A-504 BDTL | differs |
| Displacement declared | 8.27 L | 8.26 L | — |
| Maximum torque declared | 725 lb·ft · 983 N·m | 680 lb·ft · 922 N·m | +7% 7240 PRO/8940 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Case-IH multi-plate clutch running in oil bath | Hydraulically operated wet disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 29.7 gpm · 112.4 L/min | 15.5 gpm · 58.7 L/min | +91% 7240 PRO/8940 |
| Pressure declared | 2,451 psi · 169 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,170 lb · 8,242 kg | 22,311 lb · 10,120 kg | +23% 4694 |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | — | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 102.0 in · 2,591 mm | +16% 7240 PRO/8940 |
| Length declared | 200.4 in · 5,090 mm | 225.0 in · 5,715 mm | +12% 4694 |
| Width declared | 120.0–153.1 in · 3,048–3,890 mm | 96.0 in · 2,438 mm | differs |
| Ground clearance declared | 19.3 in · 489 mm | 18.5 in · 470 mm | — |
| Fuel tank declared | 379.4–470.2 qt · 359.0–445.0 L | 512.5 qt · 485.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7240 PRO/8940 sources
- Source: Traktorenlexikon, “Case-IH 7240 PRO/8940”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
J.I. Case 4694 sources
- Source: Traktorenlexikon, “Case 4694”
- Source: Traktorenlexikon, “Case 4690”