Case-IH 7230 PRO/8930 vs Steyr-Case 9220 a

5 material differences · fewer than 12

Tractor one

1997–1999

No measured PTO figure

Tractor two

1997–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the 9220 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 12 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and Steyr-Case 9220 a, field by field
Field	7230 PRO/8930	9220 a	Gap
Engine
Engine power, claimed claimed	211.1 hp	211.2 hp	—
Engine declared	CUMMINS 6 TA-830	CASE-IH 6TA-830	differs
Displacement declared	8.27 L	8.27 L	—
Maximum torque declared	614 lb·ft · 833 N·m	667 lb·ft · 904 N·m	+9% 9220 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated hydraulic wet multi-plate clutch	—
Hydraulics & hitch
Pump flow declared	29.7 gpm · 112.4 L/min	29.7 gpm · 112.4 L/min	—
Pressure declared	2,451 psi · 169 bar	2,944 psi · 203 bar	+20% 9220 a
Three-point lift at ends declared	13,530 lb · 6,137 kg	6,614 lb · 3,000 kg	+105% 7230 PRO/8930
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	17,864 lb · 8,103 kg	—
Maximum permissible mass declared	25,519 lb · 11,575 kg	25,519 lb · 11,575 kg	—
Wheelbase declared	118.3 in · 3,006 mm	118.3 in · 3,006 mm	—
Length declared	200.1 in · 5,083 mm	200.1 in · 5,083 mm	—
Width declared	120.0 in · 3,048 mm	120.0 in · 3,048 mm	—
Height declared	119.2 in · 3,027 mm	119.2 in · 3,027 mm	—
Ground clearance declared	17.3 in · 439 mm	17.3 in · 439 mm	—
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	379.4 qt · 359.0 L	differs

Source

Source