Case-IH 7230 PRO/8930 vs John Deere 8110 T

13 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the 8110 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and John Deere 8110 T, field by field
Field	7230 PRO/8930	8110 T	Gap
Engine
Engine power, claimed claimed	211.1 hp	192.4 hp	+10% 7230 PRO/8930
Engine declared	CUMMINS 6 TA-830	John Deere-PowerTech 6.081 HRW	differs
Displacement declared	8.27 L	8.13 L	—
Maximum torque declared	614 lb·ft · 833 N·m	586 lb·ft · 794 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal operated hydraulic wet John Deere multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.7 gpm · 112.4 L/min	31.8 gpm · 120.4 L/min	+7% 8110 T
Pressure declared	2,451 psi · 169 bar	3,379 psi · 233 bar	+38% 8110 T
Three-point lift at ends declared	13,530 lb · 6,137 kg	10,971 lb · 4,976 kg	+23% 7230 PRO/8930
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	23,649 lb · 10,727 kg	+32% 8110 T
Maximum permissible mass declared	25,519 lb · 11,575 kg	31,500 lb · 14,288 kg	+23% 8110 T
Wheelbase declared	118.3 in · 3,006 mm	89.0 in · 2,260 mm	+33% 7230 PRO/8930
Length declared	200.1 in · 5,083 mm	216.0 in · 5,487 mm	+8% 8110 T
Width declared	120.0 in · 3,048 mm	134.0 in · 3,404 mm	+12% 8110 T
Height declared	119.2 in · 3,027 mm	123.4 in · 3,135 mm	—
Ground clearance declared	17.3 in · 439 mm	14.2 in · 360 mm	+22% 7230 PRO/8930
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	519.9 qt · 492.0 L	differs

Source

Source