Case-IH 7230 PRO/8930 vs J.I. Case 2594 (DT)

8 material differences · fewer than 12

Tractor one

1997–1999

No measured PTO figure

Tractor two

1984–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the 2594 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and J.I. Case 2594 (DT), field by field
Field	7230 PRO/8930	2594 (DT)	Gap
Engine
Engine power, claimed claimed	211.1 hp	187.3 hp	+13% 7230 PRO/8930
Engine declared	CUMMINS 6 TA-830	CASE 504 BDT	differs
Displacement declared	8.27 L	8.26 L	—
Maximum torque declared	614 lb·ft · 833 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated wet disc clutch	—
Hydraulics & hitch
Pump flow declared	29.7 gpm · 112.4 L/min	—	—
Pressure declared	2,451 psi · 169 bar	—	—
Three-point lift at ends declared	13,530 lb · 6,137 kg	13,448 lb · 6,100 kg	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	16,380 lb · 7,430 kg	+9% 7230 PRO/8930
Maximum permissible mass declared	25,519 lb · 11,575 kg	—	—
Wheelbase declared	118.3 in · 3,006 mm	118.0 in · 2,997 mm	—
Length declared	200.1 in · 5,083 mm	182.0 in · 4,623 mm	+10% 7230 PRO/8930
Width declared	120.0 in · 3,048 mm	96.0 in · 2,438 mm	+25% 7230 PRO/8930
Height declared	119.2 in · 3,027 mm	116.9 in · 2,970 mm	—
Ground clearance declared	17.3 in · 439 mm	22.5 in · 572 mm	+30% 2594 (DT)
Turning radius, braked declared	—	13.6 ft · 4.16 m	—
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	339.9 qt · 321.7 L	differs

Source

Source