Case-IH 7210 PRO/8910 vs Steyr 8180 a

12 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 7210 PRO/8910 and the 8180 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 7210 PRO/8910 and Steyr 8180 a, field by field
Field	7210 PRO/8910	8180 a	Gap
Engine
Engine power, claimed claimed	168 hp	158.0 hp	+6% 7210 PRO/8910
Engine declared	CUMMINS 6 T-830	Steyr WD 612.96	differs
Displacement declared	8.27 L	6.60 L	+25% 7210 PRO/8910
Maximum torque declared	453 lb·ft · 614 N·m	466 lb·ft · 632 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-immersed multi-plate clutch with nine plates	—	—
Hydraulics & hitch
Pump flow declared	29.8 gpm · 112.8 L/min	13.8 gpm · 52.4 L/min	+115% 7210 PRO/8910
Pressure declared	2,451 psi · 169 bar	3,553 psi · 245 bar	+45% 8180 a
Three-point lift at ends declared	11,960 lb · 5,425 kg	14,595 lb · 6,620 kg	+22% 8180 a
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,236 lb · 7,818 kg	13,254 lb · 6,012 kg	+30% 7210 PRO/8910
Maximum permissible mass declared	25,519 lb · 11,575 kg	18,739 lb · 8,500 kg	+36% 7210 PRO/8910
Wheelbase declared	118.3 in · 3,006 mm	106.3 in · 2,700 mm	+11% 7210 PRO/8910
Length declared	197.6 in · 5,020 mm	201.8 in · 5,125 mm	—
Width declared	112.0 in · 2,845 mm	97.2 in · 2,470 mm	+15% 7210 PRO/8910
Height declared	117.8 in · 2,992 mm	113.4 in · 2,880 mm	—
Ground clearance declared	15.9 in · 404 mm	19.9 in · 505 mm	+25% 8180 a
Turning radius, braked declared	—	16.3 ft · 4.97 m	—
Fuel tank declared	380.4–470.2 qt · 360.0–445.0 L	253.6 qt · 240.0 L	differs

Source

Source