Case-IH C 70 vs VALMET 6100-4

13 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1991–1994

No measured PTO figure

Which should you choose?

Read our verdict on the C 70 and the 6100-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH C 70 and VALMET 6100-4, field by field
Field	C 70	6100-4	Gap
Engine
Engine power, claimed claimed	69.1 hp	77.9 hp	+13% 6100-4
Engine declared	Steyr WD 301.87	VALMET 320 DS	differs
Displacement declared	3.12 L	3.30 L	+6% 6100-4
Maximum torque declared	198 lb·ft · 268 N·m	229 lb·ft · 310 N·m	+16% 6100-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.5 gpm · 43.5 L/min	21.2 gpm · 80.3 L/min	+85% 6100-4
Pressure declared	3,481 psi · 240 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	5,181 lb · 2,350 kg	9,601 lb · 4,355 kg	+85% 6100-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	8,818 lb · 4,000 kg	+31% 6100-4
Maximum permissible mass declared	9,921 lb · 4,500 kg	13,889 lb · 6,300 kg	+40% 6100-4
Wheelbase declared	87.8 in · 2,229 mm	90.6 in · 2,302 mm	—
Length declared	149.8 in · 3,805 mm	169.1 in · 4,295 mm	+13% 6100-4
Width declared	76.6 in · 1,945 mm	85.2 in · 2,165 mm	+11% 6100-4
Height declared	95.5 in · 2,425 mm	106.1 in · 2,695 mm	+11% 6100-4
Ground clearance declared	15.4 in · 390 mm	16.1 in · 410 mm	—
Turning radius, braked declared	—	13.1 ft · 4.00 m	—
Fuel tank declared	66.6 qt · 63.0 L	167.0 qt · 158.0 L	+151% 6100-4

Source

Source