Case-IH C 70 vs SAME Mercury 85 Export (DT)

12 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1981–1985

No measured PTO figure

Which should you choose?

Read our verdict on the C 70 and the Mercury 85 Export (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH C 70 and SAME Mercury 85 Export (DT), field by field
Field	C 70	Mercury 85 Export (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	82 hp	+18% Mercury 85 Export (DT)
Engine declared	Steyr WD 301.87	SAME DA 1054 P	differs
Displacement declared	3.12 L	4.15 L	+33% Mercury 85 Export (DT)
Maximum torque declared	198 lb·ft · 268 N·m	218 lb·ft · 295 N·m	+10% Mercury 85 Export (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Dry SAME double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.5 gpm · 43.5 L/min	10.8 gpm · 41.0 L/min	+6% C 70
Pressure declared	3,481 psi · 240 bar	2,973 psi · 205 bar	+17% C 70
Three-point lift at ends declared	5,181 lb · 2,350 kg	8,157 lb · 3,700 kg	+57% Mercury 85 Export (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,746 lb · 3,060 kg	7,209 lb · 3,270 kg	+7% Mercury 85 Export (DT)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.8 in · 2,229 mm	91.3 in · 2,320 mm	—
Length declared	149.8 in · 3,805 mm	151.2 in · 3,840 mm	—
Width declared	76.6 in · 1,945 mm	76.0 in · 1,930 mm	—
Height declared	95.5 in · 2,425 mm	109.4 in · 2,780 mm	+15% Mercury 85 Export (DT)
Ground clearance declared	15.4 in · 390 mm	20.9 in · 530 mm	+36% Mercury 85 Export (DT)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	66.6 qt · 63.0 L	126.8 qt · 120.0 L	+90% Mercury 85 Export (DT)

Source

Source