Case-IH C-64 (A) vs Renault 70-32 PX

9 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1989–1992

No measured PTO figure

Which should you choose?

Read our verdict on the C-64 (A) and the 70-32 PX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH C-64 (A) and Renault 70-32 PX, field by field
Field	C-64 (A)	70-32 PX	Gap
Engine
Engine power, claimed claimed	63.2 hp	64.1 hp	—
Engine declared	Steyr WD 301.82 or WD 301.83	Perkins LD 4.236	differs
Displacement declared	3.12 L	3.87 L	+24% 70-32 PX
Maximum torque declared	186 lb·ft · 252 N·m	180 lb·ft · 244 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Dry Valeo double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.2 gpm · 42.3 L/min	8.5 gpm · 32.1 L/min	+32% C-64 (A)
Three-point lift at ends declared	6,437 lb · 2,920 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	6,393 lb · 2,900 kg	—
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.0 in · 2,209 mm	92.1 in · 2,340 mm	+6% 70-32 PX
Length declared	146.1 in · 3,710 mm	146.1 in · 3,710 mm	—
Width declared	81.5 in · 2,070 mm	73.2 in · 1,860 mm	+11% C-64 (A)
Height declared	95.5 in · 2,425 mm	96.1 in · 2,440 mm	—
Ground clearance declared	17.5 in · 445 mm	19.3 in · 490 mm	+10% 70-32 PX
Turning radius, braked declared	11.9 ft · 3.64 m	12.8 ft · 3.90 m	+7% 70-32 PX
Fuel tank declared	66.6 qt · 63.0 L	121.5 qt · 115.0 L	+83% 70-32 PX

Source

Source