Case-IH C-64 (A) vs Massey Ferguson MF 284 S (A)

11 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the C-64 (A) and the MF 284 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH C-64 (A) and Massey Ferguson MF 284 S (A), field by field
Field	C-64 (A)	MF 284 S (A)	Gap
Engine
Engine power, claimed claimed	63.2 hp	69.1 hp	+9% MF 284 S (A)
Engine declared	Steyr WD 301.82 or WD 301.83	Perkins A 4.236	differs
Displacement declared	3.12 L	3.87 L	+24% MF 284 S (A)
Maximum torque declared	186 lb·ft · 252 N·m	194 lb·ft · 263 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated, dry and air-cooled double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.2 gpm · 42.3 L/min	8.9 gpm · 33.6 L/min	+26% C-64 (A)
Three-point lift at ends declared	6,437 lb · 2,920 kg	3,372 lb · 1,530 kg	+91% C-64 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	7,143 lb · 3,240 kg	+14% MF 284 S (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.0 in · 2,209 mm	97.6 in · 2,480 mm	+12% MF 284 S (A)
Length declared	146.1 in · 3,710 mm	155.5 in · 3,950 mm	+6% MF 284 S (A)
Width declared	81.5 in · 2,070 mm	79.0 in · 2,007 mm	—
Height declared	95.5 in · 2,425 mm	97.2 in · 2,470 mm	—
Ground clearance declared	17.5 in · 445 mm	15.7 in · 400 mm	+11% C-64 (A)
Turning radius, braked declared	11.9 ft · 3.64 m	—	—
Fuel tank declared	66.6 qt · 63.0 L	126.8 qt · 120 L	+90% MF 284 S (A)

Source

Source