Case-IH C-64 (A) vs John Deere 5400 (A)

13 material differences

Tractor one

1995–1997

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the C-64 (A) and the 5400 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH C-64 (A) and John Deere 5400 (A), field by field
Field	C-64 (A)	5400 (A)	Gap
Engine
Engine power, claimed claimed	63.2 hp	59.3 hp	+7% C-64 (A)
Engine declared	Steyr WD 301.82 or WD 301.83	John Deere 3.029 Turbo	differs
Displacement declared	3.12 L	2.94 L	+6% C-64 (A)
Maximum torque declared	186 lb·ft · 252 N·m	115 lb·ft · 156 N·m	+62% C-64 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Pedal-operated dry CARRARO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.2 gpm · 42.3 L/min	11.8 gpm · 44.7 L/min	+6% 5400 (A)
Pressure declared	—	3,408 psi · 235 bar	—
Three-point lift at ends declared	6,437 lb · 2,920 kg	3,803 lb · 1,725 kg	+69% C-64 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	4,661 lb · 2,114 kg	+34% C-64 (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.0 in · 2,209 mm	80.7 in · 2,050 mm	+8% C-64 (A)
Length declared	146.1 in · 3,710 mm	140.2 in · 3,561 mm	—
Width declared	81.5 in · 2,070 mm	72.7 in · 1,846 mm	+12% C-64 (A)
Height declared	95.5 in · 2,425 mm	91.1 in · 2,314 mm	—
Ground clearance declared	17.5 in · 445 mm	18.1 in · 460 mm	—
Turning radius, braked declared	11.9 ft · 3.64 m	9.8 ft · 3.00 m	+21% C-64 (A)
Fuel tank declared	66.6 qt · 63.0 L	72.0 qt · 68.1 L	+8% 5400 (A)

Source

Source