14 material differences

Tractor oneCase-IH C-48 (A)1995–1996No measured PTO figureTractor twoVALMET 205/205-41989–1991No measured PTO figure

Which should you choose?

Read our verdict on the C-48 (A) and the 205/205-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH C-48 (A) and VALMET 205/205-4, field by field
Field	C-48 (A)	205/205-4	Gap
Engine
Engine power, claimed claimed	47.3 hp	48 hp	—
Engine declared	Steyr WD 308.85	VALMET D-27 D 2	differs
Displacement declared	2.36 L	2.69 L	+14% 205/205-4
Maximum torque declared	108 lb·ft · 147 N·m	129 lb·ft · 175 N·m	+19% 205/205-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Valeo double clutch type DL-2	Pedal operated dry Fichtel & Sachs single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	7.8 gpm · 29.4 L/min	10.3 gpm · 39.0 L/min	+33% 205/205-4
Pressure declared	3,553 psi · 245 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,093 lb · 2,310 kg	5,975 lb · 2,710 kg	+17% 205/205-4
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	77.5 in · 1,968 mm	83.1 in · 2,112 mm	+7% 205/205-4
Length declared	129.5 in · 3,290 mm	146.1 in · 3,710 mm	+13% 205/205-4
Width declared	68.5 in · 1,740 mm	76.8–97.2 in · 1,950–2,470 mm	differs
Height, over the cab declared	90.2 in · 2,290 mm	100.8 in · 2,560 mm	+12% 205/205-4
Ground clearance declared	17.5 in · 445 mm	17.3 in · 440 mm	—
Turning radius, braked declared	10.5 ft · 3.19 m	11.8 ft · 3.60 m	+13% 205/205-4
Fuel tank declared	56.0 qt · 53.0 L	77.1 qt · 73.0 L	+38% 205/205-4

Source

Source