Case-IH 9270 vs New Holland TJ-330

9 material differences · fewer than 12

Tractor one

1990–1995

No measured PTO figure

Tractor two

2001–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 9270 and the TJ-330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 9270 and New Holland TJ-330, field by field
Field	9270	TJ-330	Gap
Engine
Engine power, claimed claimed	330.4 hp	325.5 hp	—
Engine declared	CUMMINS NTA-855 A	CUMMINS 6 TAA-9004	differs
Displacement declared	10.02 L	8.85 L	+13% 9270
Maximum torque declared	1,115 lb·ft · 1,512 N·m	1,077 lb·ft · 1,460 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Oil-immersed U.V.C. multi-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	30.3 gpm · 114.7 L/min	40.6 gpm · 153.7 L/min	+34% TJ-330
Pressure declared	2,553 psi · 176 bar	3,263 psi · 225 bar	+28% TJ-330
Three-point lift at ends declared	24,011 lb · 10,891 kg	15,673 lb · 7,109 kg	+53% 9270
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	34,042 lb · 15,441 kg	32,296 lb · 14,649 kg	+5% 9270
Wheelbase declared	144.8 in · 3,678 mm	154.0 in · 3,911 mm	+6% TJ-330
Length declared	297.0 in · 7,544 mm	297.6 in · 7,558 mm	—
Width declared	157.7 in · 4,005 mm	145.0 in · 3,683 mm	+9% 9270
Height declared	143.0 in · 3,632 mm	143.0 in · 3,631 mm	—
Ground clearance declared	14.4 in · 365 mm	—	—
Turning radius, braked declared	—	15.1 ft · 4.60 m	—
Fuel tank declared	1,001.7 qt · 948.0 L	799.9 qt · 757.0 L	+25% 9270

Source

Source