Case-IH 9270 vs Case-IH STX 325
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9270 and the STX 325 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 9270 | STX 325 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 330.4 hp | 321 hp | — |
| Engine declared | CUMMINS NTA-855 A | CUMMINS 6 TAA-9304 | differs |
| Displacement declared | 10.02 L | 8.85 L | +13% 9270 |
| Maximum torque declared | 1,115 lb·ft · 1,512 N·m | 1,062 lb·ft · 1,440 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil-immersed U.V.C. multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 30.3 gpm · 114.7 L/min | 40.9 gpm · 154.8 L/min | +35% STX 325 |
| Pressure declared | 2,553 psi · 176 bar | 2,698 psi · 186 bar | +6% STX 325 |
| Three-point lift at ends declared | 24,011 lb · 10,891 kg | 19,335 lb · 8,770 kg | +24% 9270 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 34,042 lb · 15,441 kg | 31,934 lb · 14,485 kg | +7% 9270 |
| Maximum permissible mass declared | — | 39,022 lb · 17,700 kg | — |
| Wheelbase declared | 144.8 in · 3,678 mm | 139.0 in · 3,531 mm | — |
| Length declared | 297.0 in · 7,544 mm | 276.0 in · 7,010 mm | +8% 9270 |
| Width declared | 157.7 in · 4,005 mm | 120.0 in · 3,048 mm | +31% 9270 |
| Height declared | 143.0 in · 3,632 mm | 137.0 in · 3,480 mm | — |
| Ground clearance declared | 14.4 in · 365 mm | — | — |
| Fuel tank declared | 1,001.7 qt · 948.0 L | 799.9 qt · 757.0 L | +25% 9270 |
Case-IH 9270 sources
Source
- Source: Traktorenlexikon, “Case-IH 9270”
Case-IH STX 325 sources
Source
- Source: Traktorenlexikon, “Case-IH STX 325”
- Source: Traktorenlexikon, “New Holland TJ325”