Case-IH 9260 vs Fendt 926 Vario
13 material differences
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both; their unladen weight differs by more than 25% (55%); they were not built in overlapping years (1990–1994; 2002–2006). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 9260 | 926 Vario | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 267.4 hp | — |
| Drawbar power, measured measured | — | 216.0 hp | — |
| Engine | |||
| Engine power, claimed claimed | 296.0 hp | — | — |
| Engine declared | CUMMINS LTA-10 | MAN DO 836LE501 | differs |
| Displacement declared | 10.01 L | 6.87 L | +46% 9260 |
| Maximum torque declared | 984 lb·ft · 1,334 N·m | 864 lb·ft · 1,171.0 N·m | +14% 9260 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 31.1 mph · 50 km/h | +67% 926 Vario |
| Clutch declared | Oil-immersed multi-disc clutch | Wet multi-plate clutch as PTO clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 28.0 gpm · 106.0 L/min | 30.9 gpm · 117 L/min | +10% 926 Vario |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Three-point lift at ends declared | 14,703 lb · 6,669 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 30,135 lb · 13,669 kg | 19,401 lb · 8,800 kg | +55% 9260 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 124.0 in · 3,150 mm | 111.8 in · 2,840 mm | +11% 9260 |
| Length declared | 259.1 in · 6,580 mm | 194.5 in · 4,940 mm | +33% 9260 |
| Width declared | 104.8 in · 2,661 mm | 103.9 in · 2,640 mm | — |
| Height declared | 139.1 in · 3,532 mm | 122.4 in · 3,110 mm | +14% 9260 |
| Ground clearance declared | 15.8 in · 402 mm | 23.8 in · 605 mm | +50% 926 Vario |
| Turning radius, braked declared | — | 17.7 ft · 5.40 m | — |
| Fuel tank declared | 799.9 qt · 757.0 L | 560.0 qt · 530 L | +43% 9260 |
Case-IH 9260 sources
Source
- Source: Traktorenlexikon, “Case-IH 9260”
- Source: Traktorenlexikon, “Case-IH 9250”
Fendt 926 Vario sources
Source
- Source: OECD test report 2066, 2003
- Source: OECD test report 2064, 2003
- Source: Traktorenlexikon, “Fendt 926 Vario”